Tech Spec Spec it right!

Ubiquiti (UniFi) ECS-48S

A stackable Layer 3 access switch in Ubiquiti's second-generation UniFi Enterprise Campus line, with 32 2.5 GbE and 16 10 GbE RJ45 ports, 25G SFP28 uplinks and dedicated 100G stacking ports. Non-PoE.

Performance

Switching capacity
680 Gbps
Total non-blocking throughput
340 Gbps
Forwarding rate
506 Mpps
Supported VLANs
1,000
MAC address table size
32,000
IPv4 static routes
512
Packet buffer size
8 MB
Access lists (IPv4)
256
Access lists (MAC)
256

Interfaces

1 GbE RJ45
1 (1G/100M/10M) — OOB management port only
2.5 GbE RJ45
32 (2.5G/1G/100M/10M); 10/100M half-duplex not supported
10 GbE RJ45
16 (10G/5G/2.5G/1G/100M/10M); 10/100M half-duplex not supported
25G SFP28
4 (25G/10G/1G)
100G QSFP28
2 (100G); stacking port only, does not support uplink; breakout cables not supported
Console
1

Switching

LACP port aggregation
Yes
Stacking
Yes — up to 4 switches per stack, same port count only
Cross-stack LAG
Yes — up to 8 ports per LAG, spans switches in the stack
STP & RSTP
Yes
QoS (DSCP)
Yes
Pro AV profiles
Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron
Advanced IGMP configuration
Querier, Fast Leave, Router Port
IGMP snooping
Yes
802.1X control
Yes
MAC-based ACLs & device isolation
Yes
DHCP snooping & guarding
Yes
Egress rate limit
Yes
Flow control
Yes
Storm control
Yes
Multicast & broadcast rate limiting
Yes
MAC address blocking
Yes
IP-based ACLs & network isolation
Yes
MAC-based port restriction
Yes
Port isolation
Yes
Port mirroring
Yes
Jumbo frames
Yes
LLDP-MED
Yes
Voice VLAN
Yes
Loop protection
Yes
Virtual network override
Yes

Routing

DHCP server (local networks)
Yes
DHCP relay
Yes
Inter-VLAN routing (local networks)
Yes
Static routing (local networks)
Yes

Power

Max. power consumption
250 W
Power method
2 × universal input, 100–240V AC, 50/60 Hz
Power input method
2 × AC input, hot-swappable power modules
Power supply
2 × hot-swappable AC/DC 550 W power modules
Supported voltage range
100–240V AC
Heat dissipation
853 BTU/hr

Management

Management
Ethernet, OOB management port, serial console, app
LCM display
1.3" touchscreen
Application requirements
UniFi Network version 10.6.101 and later

Physical

Dimensions
442.4 × 44 × 496 mm (17.4 × 1.7 × 19.5")
Weight
10.2 kg (22.5 lb) without mounting brackets; 10.3 kg (22.7 lb) with
Enclosure material
SGCC steel
Mount material
SGCC steel
Form factor
Rack mount, 1U full-depth; requires a 4-post rack, or a center-mount bracket/cantilever shelf on 2-post racks
Supported rack depth
482.6 mm (19") four-post racks; post depths 650–1,000 mm (25.6–39.4")
Redundancy
Switch stacking; 2 hot-swappable PSUs; 4 hot-swappable fans (3+1 redundant)

Environmental

ESD protection
Air: ±12 kV, contact: ±8 kV
Ambient operating temperature
-5 to 40°C (23 to 104°F)
Ambient operating humidity
10 to 90% noncondensing
Certifications
CE, FCC, IC