Ubiquiti (UniFi) ECS-24S-PoE
A 1U UniFi Enterprise Campus access switch with 24 PoE+++ Etherlighting ports (8 x 2.5G + 16 x 10G RJ45), 4 x 25G SFP28 uplinks and 2 x 100G QSFP28 stacking ports; the smaller sibling of the ECS-48S-PoE, also intended to pair with the Enterprise Campus Aggregation switch.
Performance
- Switching capacity
- 460 Gbps
- Total non-blocking throughput
- 230 Gbps
- Forwarding rate
- 342 Mpps
- Supported VLANs
- 1,000
- MAC address table size
- 32,000
- IPv4 static routes
- 512
- Packet buffer size
- 8 MB
- Access lists (IPv4)
- 256
- Access lists (MAC)
- 256
Interfaces
- 1 GbE RJ45
- 1 (1G/100M/10M); OOB management port only
- 2.5 GbE RJ45
- 8, all PoE+++ (2.5G/1G/100M/10M); 10/100M half-duplex not supported
- 10 GbE RJ45
- 16, all PoE+++ (10G/5G/2.5G/1G/100M/10M); 10/100M half-duplex not supported
- 25G SFP28
- 4 (25G/10G/1G)
- 100G QSFP28
- 2 (100G); stacking port only, does not support uplink; breakout cables are not supported
- Console
- 1
Switching
- Layer 3
- Yes
- LACP port aggregation
- Yes
- Stacking
- Yes; up to 4 switches per stack, only switches with the same port count
- Cross-stack LAG
- Yes; up to 8 ports per LAG across switches in the stack
- STP & RSTP
- Yes
- QoS (DSCP)
- Yes
- Pro AV profiles
- Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron
- Advanced IGMP configuration
- Querier, Fast Leave, Router Port
- IGMP snooping
- Yes
- 802.1X control
- Yes
- MAC-based ACLs & device isolation
- Yes
- IP-based ACLs & network isolation
- Yes
- MAC-based port restriction
- Yes
- DHCP snooping & guarding
- Yes
- Egress rate limit
- Yes
- Flow control
- Yes
- Storm control
- Yes
- Multicast & broadcast rate limiting
- Yes
- MAC address blocking
- Yes
- Port isolation
- Yes
- Port mirroring
- Yes
- Jumbo frames
- Yes
- LLDP-MED
- Yes
- Voice VLAN
- Yes
- Loop protection
- Yes
- Virtual network override
- Yes
Routing
- DHCP server (local networks)
- Yes
- DHCP relay
- Yes
- Inter-VLAN routing (local networks)
- Yes
- Static routing (local networks)
- Yes
Power
- PoE ports
- 24 x PoE+++
- Max. PoE wattage per port
- PoE 15.4 W, PoE+ 30 W, PoE++ 60 W, PoE+++ 90 W (802.3bt Type 4, Class 8)
- Total PoE availability
- With (2) 600W modules: 1,050 W shared / 450 W redundant. With optional (2) 1,200W modules: 2,250 W shared (200-240V) / 1,850 W shared (100-120V), 1,050 W redundant (200-240V) / 850 W redundant (100-120V)
- Max. power consumption
- 150 W excluding PoE output; 2,400 W including PoE output
- Power supply
- (2) hot-swappable AC/DC 600 W power modules (1,200 W modules sold separately)
- Power input
- (2) universal AC input, 100-240 V, 50/60 Hz, hot-swappable
- Heat dissipation
- 512 BTU/hr excluding PoE output
Management
- Management
- Ethernet, OOB management port, serial console, AR
- LCM display
- 1.3" touchscreen
- Application requirement
- UniFi Network version 10.6.101 and later
- Certifications
- CE, FCC, IC
- NDAA compliant
- Yes
Physical
- Dimensions
- 442.4 x 44 x 496 mm (17.4 x 1.7 x 19.5")
- Weight
- Without mounting brackets: 9.2 kg (20.3 lb); with mounting brackets: 9.3 kg (20.5 lb)
- Enclosure material
- SGCC steel
- Mount material
- SGCC steel
- Form factor
- Rack mount, 1U, full-depth; requires a 4-post rack, or a center-mount bracket/cantilever shelf on 2-post racks
- Supported rack depth
- 482.6 mm (19") four-post racks, post depths 650-1,000 mm (25.6-39.4")
- Redundancy
- Switch stacking, (2) hot-swappable PSUs, (4) hot-swappable fans
- Fan method
- (4) hot-swappable fan modules, 3+1 redundancy
Environmental
- Ambient operating temperature
- -5 to 40 C (23 to 104 F)
- Ambient operating humidity
- 10 to 90% noncondensing
- ESD protection
- Air +/-12 kV; contact +/-12 kV