Panasonic AW-UE200 (W/K)
High-end 4K PTZ camera built around the industry's first 1.2-type 5K global-shutter MOS sensor in a PTZ camera, pairing a 22x optical zoom with ultra-high-speed pan/tilt for live events, sports broadcast and LED-wall studio production.
Camera
- Sensor
- 1.2-type Global Shutter 5K MOS ×1, approx. 14.0 effective megapixels
- Lens
- Motorized optical 22x zoom, F2.8–F4.8, f=8.3–183.0 mm (35 mm equivalent: 22.5–500 mm)
- Zoom
- Optical 22x; i.Zoom UHD 28x, FHD 35x; D.Extender 1.4x/2x; variable zoom speed approx. 0.5–180 s (telephoto to wide)
- Angle of view
- Horizontal 80° (wide) to 4° (tele); vertical 49° (wide) to 2° (tele); diagonal 88° (wide) to 4° (tele)
- Optical filter
- ND: Through, 1/4, 1/16, 1/64; IR: Night Mode ON/OFF (low-pass filter equipped)
- Horizontal resolution
- 1,800 TV lines type (center area, UHD mode, wide end)
- Pan/tilt speed
- 0.004° to 400°/s (normal mode); acceleration up to 1800°/s²
- Pan/tilt range
- Pan ±175°; tilt –30° to +210°
Audio
- XLR input
- XLR (2ch) or MIC/LINE input compatible (SDI/HDMI/IP); AAC compatible (IP only); XLR 3-pin female balanced input, 2ch
- Dante® audio
- Not equipped (standard model — see AW-UE210 for Dante-equipped version)
Video conferencing
- Auto framing
- Built-in AI-based Auto Framing tracks subjects and holds composition; switchable fully automatic / semi-automatic
- High frame rate
- HD high-speed recording at 120 fps and 180 fps, planned via a future firmware update (targeted Q3 CY2027)
Ports
- HDMI OUT
- HDMI 2.0 standard, 4:2:2/10-bit (HDCP not supported; Viera Link not supported)
- 12G-SDI OUT
- SMPTE2082-1, SMPTE424M/SMPTE292M, 75Ω BNC ×1 (Level-A/Level-B compatible)
- 3G-SDI OUT1
- SMPTE424M/SMPTE292M, 75Ω BNC ×1
- 3G-SDI OUT2/PM
- SMPTE424M/SMPTE292M, 75Ω BNC ×1 (monitor output)
- G/L IN
- BNC; BBS (Black Burst Sync), tri-level sync supported
Connectivity
- Streaming protocols
- NDI® High Bandwidth, SRT, FreeD, OpenTrackIO
- IP control
- LAN (RJ-45), 100BASE-T/100BASE-TX/1000BASE-T
- Serial control
- RS-422A (RJ-45) CONTROL IN
Power
- Power requirements
- 12 V DC ±10% (10.8–13.2 V); PoE++ (IEEE 802.3bt standard, DC 42–57 V) camera input
- Current consumption
- Less than 5.0 A (DC IN); less than 1.5 A (PoE++ power supply)
Physical
- Dimensions (W × H × D)
- 212 × 308 × 248 mm (8-3/8 × 12-1/8 × 9-3/4 in), excluding protrusions and ceiling mount bracket
- Mass
- Approx. 7.5 kg (16.53 lb), excluding mount bracket