Tech Spec Spec it right!

LG Electronics LG 40HT513D

An FDA-cleared 40-inch curved (21:9) diagnostic monitor for radiology, with an 11MP IPS Black panel at 5,120×2,160, a detachable calibration sensor, 3-way Picture-by-Picture, and a built-in dual-PC KVM switch so radiologists can review current and prior images alongside EMR records and control two PCs from one screen.

Display

Panel
IPS Black, curved (2500R), 3-side virtually borderless design
Size
40" (100.859 cm), 21:9 aspect ratio
Resolution
5120 × 2160 (11 MP)
Pixel pitch
0.1815 × 0.1815 mm
Brightness
500 cd/m² typical; 360 cd/m² minimum
Contrast
2000:1 typical; 1400:1 minimum
Response time
5 ms (GtG, Faster mode)
Viewing angle
178° (R/L), 178° (U/D), CR≥10
Colour depth
8-bit + FRC (1.06 billion colours)
Colour gamut
DCI-P3 99% typical / 95% minimum (CIE1976)
Colour temperature
6500K / 7500K / 9300K / manual (5000K–10000K)
HDR
HDR10
Surface treatment
AG (anti-glare), 3H hardness
Backlight
Edge LED, global dimming
Picture modes (SDR)
Custom, Vivid, Mono, Pathology, Text, DICOM, DICOM (Custom), Calibration 1, Calibration 2
Picture modes (HDR)
Custom, Vivid, Standard
Medical imaging features
DICOM compliant, factory calibration (Delta E), hardware calibration via detachable front sensor, Pathology Mode, Focus View, brightness stabilization, uniformity correction, 3PBP (3 picture-by-picture), reader mode, super resolution+, black stabilizer
Software
LG Calibration Studio Medical (centralized DICOM Part 14/GSDF calibration, remote management, QA alerts); OnScreen Control (LG Screen Manager)

Ports

DisplayPort
2 × DisplayPort, DP 2.1 (UHBR 13.5), HDCP 2.2, up to 5120×2160 @120Hz
HDMI
1 × HDMI, supports FRL per HDMI 2.1, HDCP 2.1 (PC)/2.1 (AV)/1.4, up to 5120×2160 @120Hz (56–61Hz V frequency)
USB-C
1 × USB-C (1 up / 1 down), DP Alt Mode 1.4, HDCP 2.2, 65 W power delivery, data transmission, up to 5120×2160 @120Hz
USB upstream
3 × USB-B + 1 × USB-C
USB downstream
3 × USB-A + 1 × USB-C + 1 × USB-A (service only)
Audio
Mic in, headphone out
KVM
Built-in dual-controller KVM switch for two connected PCs with drag-and-drop
Port location
Rear, bottom

Ergonomics

Height
0–110 mm adjustment
Tilt
-5° to 15°
Swivel
±15°
Stand
OneClick stand; mechanical power switch
VESA
100 × 100 mm, wall mountable

Power

Type
Built-in power supply
Input
100–240 VAC, 50–60 Hz
Typical consumption
65 W
Maximum consumption
180 W
Sleep mode
Under 1 W
Off (DC off)
Under 0.3 W

Physical

Dimensions without stand
947.7 × 419.8 × 106.3 mm (W×H×D)
Dimensions with stand
947.7 × 626.9 × 279.9 mm (W×H×D)
Shipping dimensions
1110 × 373 × 525 mm
Weight
8.45 kg without stand; 11.8 kg with stand; 17.15 kg shipping
Colour
Black (back cover, middle cabinet, stand base and body)
In the box
Detachable calibration sensor, printed calibration report, HDMI cable (1.8 m), USB 3.0 upstream cable (1.8 m), USB Type-C cable (1.8 m), power cord
Certifications
KGMP, RoHS, REACH, WEEE, MFDS, UL/cUL, IEC/EN 60601-1 and 60601-1-2, IEC/EN 60950-1 and 55032/55024, FDA 510(k) Class II clearance, ISO 13485, GMP, FCC Part 15 Class A
Warranty
5 years (30,000 hours)