Lenovo ThinkAgile HX1021
A ruggedized, half-width 1U edge appliance with a single soldered Xeon D processor, built to run Nutanix hyperconverged software close to where data is generated (retail, manufacturing, IoT); wall-, shelf- or rack-mountable.
Memory
- Slots
- 4 DIMM (1 DIMM per channel, 4 channels)
- Max capacity
- 256 GB with 4 × 64 GB LRDIMM
- Type
- Lenovo TruDDR4 2666 MHz RDIMM or LRDIMM; bus runs at the processor's lower memory-controller speed (2133/2400 MHz)
- Protection
- ECC, SDDC (x4-based DIMMs); memory mirroring and rank sparing not supported
Storage
- Layout
- All-M.2: no 2.5"/3.5" drive bays
- Boot drives
- 1 × dual M.2 SATA boot adapter (2 drives), RAID-0/1 via Marvell 88SE9230 controller, UEFI boot mode only
- Data drives
- Up to 2 × 4-bay M.2 adapters (8 drives total), NVMe only, direct-connected to the processor (no RAID)
- Max data storage
- 5.2 TB using 8 × 650 GB NVMe drives
- Boot drive option
- ThinkSystem M.2 480 GB Industrial A600i SATA SSD
- Data drive options
- ThinkSystem M.2 2 TB P4511 NVMe SED SSD; ThinkSystem M.2 7450 PRO 1.92 TB NVMe SSD
Expansion
- Riser
- 1 × PCIe x32 riser slot ("wings") accepting either a PCIe Riser Cage (M.2 4-bay + PCIe 3.0 x16 LP slot) or an M.2 Riser Cage (M.2 4-bay + M.2 4-bay)
- PCIe slot
- One PCIe 3.0 x16 low-profile slot (only with the PCIe Riser Cage), used for the GPU
Networking
- Network module (SFP+)
- 2 × 10 GbE SFP+ (Intel X722) + 2 × 1 GbE RJ45 (Intel I350) + 2 × dedicated 1 GbE management ports
- Network module (BASE-T)
- 2 × 10GBASE-T RJ45 (Intel X722) + 2 × 1 GbE RJ45 (Intel I350) + 2 × dedicated 1 GbE management ports
- Management ports
- Based on Realtek RTL8363SC; usable as a redundant pair or daisy-chained across up to 7 nodes
- Note
- Wireless network module not supported; port 1 of the 10 GbE pair can be shared with XCC for Wake-on-LAN/NC-SI
Power
- Supply
- 12 V Power Distribution Module fed by 1 or 2 hot-pluggable 240 W AC adapters (100-240 V, 3.1 A, 20 A/240 W max output)
- Redundancy
- 2nd adapter is redundant; required with a GPU, any LRDIMMs, the 16-core CPU, or 4+ NVMe drives
Ports
- Front
- 2 × USB 3.1 Gen 1, VGA, 1-2 dedicated RJ-45 1 GbE management ports (per network module), mini-USB for local/mobile-app management
- Rear
- 2 × USB 2.0, 1 × RJ-45 serial port
Display
- Video
- Matrox G200, 16 MB, integrated in XClarity Controller, up to 1920×1200 32bpp @ 60 Hz
Physical
- Dimensions
- 43 × 209 × 376 mm (1.7 × 8.2 × 14.8 in)
- Weight
- Up to 3.6 kg (7.9 lb)
- Cooling
- 3 × non-hot-swap 40 mm fans, N+1 redundant in most configurations
- Mounting
- DIN rail wall mount, ceiling mount, 1U rack (2 nodes via E1 enclosure) or 2U short-depth rack (2 nodes via E2 enclosure)
- Operating temperature
- ASHRAE A4, 5-45°C (0-55°C with no GPU installed; max altitude 3,050 m at extended range)
Management
- Controller
- XClarity Controller (XCC) Enterprise embedded management with remote control
- Tools
- XClarity Administrator, XClarity Integrator, XClarity Energy Manager, ThinkShield Edge Mobile Management app, XClarity Mobile app
- Security
- ThinkShield Key Vault Portal remote claim/activation, front locking bezel (optional), Kensington slot with intelligent lock switch, motion/intrusion detection (optional), TPM, SED support, power-on/admin passwords
Operating systems
- Hypervisors
- Nutanix AHV 20190916, VMware ESXi 6.7 U3
- Software
- Nutanix Acropolis Pro/Ultimate (licenses purchased separately from Nutanix)
Processors
- Intel Xeon D-2143IT
- Intel Xeon D-2163IT
- Intel Xeon D-2166NT
- Intel Xeon D-2183IT