HP ProLiant ML110 Gen9
HPE's affordable single-socket 4.5U tower server for small and midsized businesses, built around one Intel Xeon E5-2600 v3/v4 or E5-1600 v3/v4 processor with up to 8 DDR4 DIMMs and a choice of non-hot-plug LFF, hot-plug LFF or hot-plug SFF drive cages.
Memory
- Slots
- 8 DIMM (4 channels, 2 DIMMs per channel; single processor)
- Type
- DDR4 Registered (RDIMM) or Load Reduced (LRDIMM), ECC
- Max (RDIMM)
- 256 GB (8 x 32 GB RDIMM @ 2133 MHz)
- Max (LRDIMM)
- 128 GB (8 x 16 GB LRDIMM @ 2133 MHz)
- Protection
- Advanced ECC; online spare
- Note
- RDIMM and LRDIMM cannot be mixed; mixing can halt the server at BIOS
Storage
- Controller (entry/base)
- HPE Dynamic Smart Array B140i (cannot mix with a stand-up internal controller)
- Optional controllers
- HPE Smart Array H240, P440, P840
- Bays
- Up to 4 non-hot-plug LFF 3.5" SATA, or 4 (expandable to 8) hot-plug LFF 3.5" SAS/SATA, or 8 (expandable to 16) hot-plug SFF 2.5" SAS/SATA
- Optical
- Optional slim SATA DVD-ROM or DVD-RW
- Max capacity (8 LFF)
- 96 TB (8 x 12 TB SAS/SATA HDD)
- Max capacity (16 SFF)
- 32 TB (16 x 2 TB SAS/SATA HDD)
- Note
- 16 SFF configuration is limited to the P840 controller; 8LFF/8SFF need two mini-SAS cable kits
Graphics
- Integrated
- Matrox G200; 16 MB flash + 128 MB DDR3; max 1920x1200 @ 16-bit color, 1280x1024 @ 32-bit color
Expansion
- Slot 1
- PCIe 3.0 x16 (x16 connector), full-height, up to 9.5" length
- Slot 2
- PCIe 3.0 x4 (x4 connector), full-height half-length
- Slot 3
- PCIe 3.0 x8 (x8 connector), full-height half-length
- Slot 4
- PCIe 3.0 x4 (x4 connector), full-height half-length
- Slot 5
- PCIe 3.0 x8 (x8 connector), full-height half-length
- Note
- Any PCIe card requires the PCI Fan and Baffle Kit (784580-B21)
Networking
- Embedded
- Broadcom 5717C0 dual-port 1Gb (2 x RJ-45)
- iLO
- Optional HPE ML Gen9 Dedicated iLO Port Kit (780310-B21), 1Gb
Power
- Non-redundant
- HPE 350 W ATX-Gen9 FIO Power Supply, or HPE 550 W ATX-Gen9 FIO Power Supply
- Redundant
- HPE 750 W CS Gold hot-plug Power Supply Kit (requires RPS Enablement Kit 784582-B21, supports 2 PSUs)
- Input
- 100-240 VAC, 50-60 Hz
- Fans
- 1 non-hot-plug, non-redundant fan standard (92x32 mm; 92x38 mm upgrade kit required for 140 W processors or SAS SSD)
Ports
- Front
- 2 x USB 3.0
- Rear
- 2 x USB 3.0, 2 x USB 2.0, 1 x VGA (video), 2 x RJ-45 (1GbE), optional dedicated iLO RJ-45
- Internal
- 1 x USB 3.0, 1 x USB 2.0, 1 x MicroSD (not hot-pluggable)
Physical
- Form factor
- Tower (4.5U)
- Dimensions (H x W x D)
- 17.32 x 7.68 x 18.92 in (44.0 x 19.5 x 48.05 cm)
- Weight
- 27.56-55 lb (12.5-24.9 kg)
Management
- BMC
- HPE iLO (firmware iLO 4 2.0 or later) with NAND
- Security
- Power-on password, setup password, administrator's password, serial interface control, power switch security, TPM 1.2 / TPM 2.0, UEFI Secure Boot
- Standards
- ACPI 2.0b, PCIe 3.0, PXE, WOL, IPMI 2.0, SMASH CLP, DCMI 1.0, SMBIOS 2.7.1, ASHRAE A3
Operating systems
- Supported
- Microsoft Windows Server; Red Hat Enterprise Linux (RHEL); SUSE Linux Enterprise Server (SLES); VMware; ClearOS
Processors
- Intel Xeon E5-2660 v4
- Intel Xeon E5-2640 v4
- Intel Xeon E5-2630L v4
- Intel Xeon E5-2623 v4
- Intel Xeon E5-2620 v4
- Intel Xeon E5-2609 v4
- Intel Xeon E5-2603 v4
- Intel Xeon E5-1680 v4
- Intel Xeon E5-1660 v4
- Intel Xeon E5-1620 v4
- Intel Xeon E5-1607 v4
- Intel Xeon E5-1603 v4
- Intel Xeon E5-1650 v3
- Intel Xeon E5-1620 v3
- Intel Xeon E5-1603 v3