HP ProLiant MicroServer Gen11
A larger, redesigned ultra micro tower that adds a second PCIe slot (one Gen5 x16, one Gen4 x4/x8), four DDR5 UDIMM slots and support for a single-wide low-profile GPU. Choose an Intel Xeon 6300P-series, Xeon E-2400 or Pentium G7400 processor; iLO 6 remote management is enabled by default over the shared NIC 1 port, with an optional module adding a dedicated iLO port, M.2 slot and serial port. Stands flat, upright or wall-mounted.
Memory
- Slots
- 4 DIMM (A, B, C, D); 2 channels, 2 DIMMs per channel
- Type
- HPE Standard Memory DDR5 unbuffered UDIMM with ECC; non-ECC UDIMMs, RDIMMs and LRDIMMs are not supported
- Max
- 128 GB (4 × 32 GB UDIMM)
- Speed
- 4400 MT/s with 1 DIMM per channel; 4000 MT/s (16 GB) or 3600 MT/s (32 GB) with 2 DIMMs per channel, on Xeon E or Pentium G7400
- Population
- Populate A first, then B, C, D in order
Storage
- Drive bays
- 4 non-hot-plug LFF (3.5") SATA bays; none ship standard
- SFF drives
- 2.5" SATA HDDs/SSDs fit with the HPE MicroServer Gen10 SFF NHP SATA Converter Kit (870213-B21), one kit per drive
- HDD options
- HPE 1 TB (801882-B21) and 4 TB (801888-B21) SATA 6G Business Critical 7.2K LFF
- SSD options
- HPE 480 GB (P65272-B21) and 960 GB (P40498-B21) SATA 6G Read Intensive SFF
- Max capacity
- 16 TB (4 × 4 TB 3.5" SATA HDD) or 3.84 TB (4 × 960 GB 2.5" SATA SSD)
- Embedded RAID
- Intel VROC SATA Hybrid RAID: RAID 0/1/5/10; disabled by default (BIOS default is SATA AHCI); UEFI mode only; supports Windows Server and Linux, not VMware
- Essential RAID option
- HPE Smart Array E208e-p SR Gen10 Controller
- Performance RAID options
- HPE MR408i-p Gen11 SPDM or MR216i-p Gen11 SPDM Storage Controller (needs the MicroServer Gen11 Controller Cable Kit, P68413-B21)
- Boot media
- M.2 slot for an M.2 SSD, enabled by the optional dedicated iLO/M.2/serial port kit (P65741-B21, module sold without the M.2 SSD)
Graphics
- Integrated
- iLO 6 ASIC video controller: up to 1920×1200 @ 85 Hz (16 bpp), 16 MB video memory
- Outputs
- 1 × VGA, 1 × DisplayPort 1.1a (rear); both mirror the same image, no extended desktop
- Add-in GPU
- NVIDIA RTX A400 4GB PCIe low-profile accelerator (S7U71C), single-wide, PCIe Slot 1 only; HPE recommends system memory at least twice the GPU's
Expansion
- Slot 1
- PCIe 5.0 x16 (x16 connector), low profile
- Slot 2
- PCIe 4.0 x4 (x8 connector), low profile
- iLO/M.2/serial slot
- Optional dedicated iLO/NIC/M.2/COM Port Kit (P65741-B21, shared with the ML30 Gen11): dedicated iLO port, M.2 SSD slot, serial port
Networking
- Embedded
- Broadcom BCM5719 4-port 1 GbE BASE-T (4 × RJ45)
- Shared iLO
- NIC port 1 carries iLO traffic by default — no enablement kit needed for basic remote iLO 6 access
- Dedicated iLO
- Optional dedicated NIC port via the iLO/M.2/serial port kit (P65741-B21)
- 10 GbE options
- Broadcom BCM57416 2-port BASE-T (P26253-B21), Broadcom BCM57412 2-port SFP+ (P26259-B21)
- 1 GbE options
- Broadcom BCM5719 4-port BASE-T (P51178-B21), Intel I350-T4 4-port BASE-T (P21106-B21)
- Standards
- PXE and Wake-on-LAN
Power
- Power supply
- One 180 W or one 330 W external power adapter, non-redundant
- Input
- 100–240 VAC, 50–60 Hz, 2.5 A at 90 VAC
- Output
- 180 W or 330 W steady-state and peak, at 100 or 200 VAC
- Cord
- C5 power cord with the 180 W adapter, C13 power cord with the 330 W adapter; 6 ft/1.83 m; power cord clip secures the adapter cable
Ports
- Front
- 2 × USB 3.2 Gen 2 Type-A (10 Gb/s)
- Rear
- 4 × USB 3.2 Gen 1 Type-A (5 Gb/s), 1 × DisplayPort 1.1a, 1 × VGA, 4 × RJ45 1 GbE, optional serial port and iLO RJ45 (via P65741-B21)
Physical
- Form factor
- Ultra micro tower; stands flat, upright, or wall-mounted (Wall Mount Kit P69315-B21, not for drywall)
- Dimensions (H × W × D, with feet)
- 154 × 261 × 249 mm (6.06 × 10.28 × 9.82 in)
- Weight
- 8.52 kg minimum (one DIMM, one drive, expansion board, iLO Enablement Kit) to 8.65 kg maximum (four drives, four DIMMs, expansion board, iLO Enablement Kit)
- Fans
- 1 non-redundant system fan
- Operating temperature
- 10–35 °C standard; ASHRAE A3/A4 extended ambient support for approved configurations
- Acoustics (LWAd / LpAm)
- 3.4 B / 24 dBA idle and operating, all pre-configured models
- Security
- Front bezel lock, padlock eye, Kensington slot, power cord clip, embedded TPM 2.0 (no separate module needed)
Management
- BMC
- HPE iLO 6 ASIC on the system board
- Remote management
- Enabled by default over the shared iLO port (NIC 1) — browser, CLI or API access without an activation key or extra module
- Optional module
- iLO/NIC/M.2/COM Port Kit (P65741-B21) adds a dedicated iLO port, an M.2 slot and a serial port
- Tools
- Intelligent Provisioning, iLO RESTful API (Redfish), IPMI 2.0, Smart Update/SPP, HPE Compute Ops Management (3-year subscription included by default), HPE OneView Standard
- Firmware
- UEFI Class 3, UEFI-only boot mode; Secure Boot, Silicon Root of Trust, firmware rollback
Operating systems
- Support
- Microsoft Windows Server; VMware ESXi (Xeon 6300P-series and Xeon E-2400 only, not Pentium G7400, no Legacy Mode); Red Hat Enterprise Linux; Canonical Ubuntu; Citrix XenServer
Processors
- Intel Xeon 6377P
- Intel Xeon 6369P
- Intel Xeon 6357P
- Intel Xeon 6353P
- Intel Xeon 6349P
- Intel Xeon 6337P
- Intel Xeon 6333P
- Intel Xeon 6325P
- Intel Xeon 6315P
- Intel Xeon E-2434
- Intel Xeon E-2414
- Intel Pentium Gold G7400