HP ProLiant MicroServer Gen10
HPE's ultra-micro-tower server for small and home offices, built on a soldered AMD Opteron X3000 APU with two ECC UDIMM slots (32 GB max), four non-hot-plug 3.5" SATA bays, a slim media bay and two low-profile PCIe 3.0 slots. It has no iLO; HPE has retired it.
Memory
- Slots
- 2 DIMM (1A, 2B)
- Type
- HPE Standard Memory DDR4 unbuffered UDIMM with ECC (PC4-2400T); ECC only
- Standard
- 8 GB (1 × 8 GB) in the pre-configured models
- Max
- 32 GB (2 × 16 GB UDIMM)
- Speed
- X3418 and X3421: up to 2400 MT/s; X3216: up to 1600 MT/s (QuickSpecs; the User Guide states the reverse)
- Kits
- 8 GB 1Rx8 DDR4-2400 (862974-B21), 16 GB 2Rx8 DDR4-2400 (862976-B21)
- Population
- A single DIMM goes in slot 1A; two DIMMs as 8 + 8 or 16 + 16 GB
Storage
- Drive bays
- 4 non-hot-plug LFF (3.5") SATA bays behind the front bezel; none ship standard (the 870208 WW BTO models ship with 1 × 1 TB)
- SFF drives
- HPE MicroServer Gen10 SFF NHP SATA Converter Kit 870213-B21 fits a 2.5" drive in an LFF bay
- Media bay
- 1 slim bay: 9.5 mm SATA DVD-ROM (726536-B21) or DVD-RW (726537-B21), or a 7 mm SATA SSD with the Slim SFF SATA Enablement Kit 870212-B21
- HDD options
- HPE 1 TB (801882-B21) and 4 TB (801888-B21) SATA 6G Midline 7.2K LFF; 1 TB SATA 6G Entry 7.2K LFF (843266-B21)
- SSD options
- HPE 240 GB SATA 6G Read Intensive SFF SSD (P09685-B21 PM883, 875507-B21)
- Max capacity
- 16 TB (4 × 4 TB 3.5" SATA)
- Embedded RAID
- Marvell 88SE9230 PCIe to SATA 6 Gb/s controller: SATA only, RAID 0/1/10, no FBWC; set up with the Marvell BIOS Utility or Marvell Storage Utility
- RAID option
- HPE Smart Array E208i-p SR Gen10 (804394-B21): 12G SAS/SATA, RAID 0/1/5/10, no cache/FBWC; uses a PCIe slot
- Internal USB
- 1 × USB 2.0 port on the system board for a boot or backup flash device; Solution models ship an internal 8 GB USB drive with ClearOS and ClearVM
Graphics
- Integrated
- Graphics in the Opteron APU (4, 6 or 8 graphics cores by model)
- Outputs
- 1 × VGA, 2 × DisplayPort 1.2 (rear)
- 4K
- DisplayPort needs two DIMMs (dual-channel memory) for 4K at 60 Hz; one DIMM limits it to 30 Hz
- GPU option
- HPE AMD Radeon Pro WX2100 Graphics Accelerator (Q1P47A): adds 2 × mini-DisplayPort and 1 × DisplayPort 1.4
Expansion
- Slot 1
- PCIe 3.0 x8 in an x8 open-ended connector (takes up to x16 cards), low profile; negotiates x8 / x4 / x1
- Slot 2
- PCIe 3.0 x1 in an x4 open-ended connector (takes up to x16 cards), low profile
- Other
- TPM connector; internal USB 2.0 port
Networking
- Embedded
- Broadcom BCM5720 dual-port 1 GbE LOM (2 × RJ45, 10/100/1000 Mb/s)
- Options
- HPE Ethernet 1Gb 2-port 332T (615732-B21), 1Gb 4-port 331T (647594-B21), 10Gb 2-port 521T (867707-B21)
- Note
- HPE says these PCIe adapters support server operating systems only
- Standards
- PXE and Wake-on-LAN
Power
- Power supply
- One 200 W non-hot-plug, non-redundant internal supply (spare 874739-001)
- Input
- 100-240 VAC, 50-60 Hz, 3.5 A at 100 VAC; 244 W input at 115 VAC
- Efficiency
- >82% at full load
- Cord
- C13 power cord (6 ft / 1.83 m) ships with pre-configured models
Ports
- Front
- 2 × USB 3.0
- Rear
- 2 × USB 3.0, 2 × USB 2.0, 2 × RJ45 1 GbE, 1 × VGA, 2 × DisplayPort 1.2
- Internal
- 1 × USB 2.0
- USB total
- USB 3.0: 4 (2 front, 2 rear); USB 2.0: 3 (2 rear, 1 internal)
Physical
- Form factor
- Ultra micro tower
- Dimensions (H × W × D)
- 235 × 230 × 254 mm with feet (9.25 × 9.06 × 10.00 in)
- Weight
- 6.5 kg minimum (one drive, one DIMM) to 9.7 kg maximum (four drives, two DIMMs, media drive, two cards)
- Fans
- 1 non-redundant system fan
- Operating temperature
- 10-35 °C at sea level; performance may drop above 30 °C or with a fan fault
- Acoustics (LWAd / LpAm)
- 3.8 B / 26 dBA lightly loaded (15 W CPU); 4.0 B / 30.4-31 dBA heavily loaded (35 W CPU, 4 LFF drives)
- Security
- Lockable front bezel, padlock eye, Kensington slot, optional TPM 2.0 kit (745823-B21)
Management
- Remote management
- None listed: neither the QuickSpecs nor the User Guide lists an iLO or BMC
- Firmware setup
- Aptio Setup Utility (UEFI and legacy boot modes, Secure Boot, embedded UEFI Shell)
- Storage tools
- Marvell BIOS Utility, Marvell Storage Utility; Smart Storage Administrator for a Smart Array controller
- OS install
- HPE Rapid Setup Software (also sets up RAID)
Operating systems
- Listed
- Microsoft Windows Server 2012 R2, Windows Server 2016, Red Hat Enterprise Linux 7.4, ClearOS
- Preload
- ClearOS preloaded on the 870208 WW BTO models; ClearOS + ClearVM on the Solution models' internal USB drive
Processors
- AMD Opteron X3216
- AMD Opteron X3418
- AMD Opteron X3421