HP ProLiant e910t Server Blade
A single-socket, 2nd Gen Intel Xeon Scalable 2U edge-compute server blade for the smaller HPE Edgeline EL8000t Converged Edge System, which holds two independent e910t blades in 2U; rated for extended 0-55 C environments for telecom, defense and other deep-edge deployments.
Memory
- Slots
- 12 DIMM slots (1 processor, 6 channels, 2 DIMMs/channel)
- Type
- HPE Edgeline DDR4-2933 Registered (RDIMM) or Load Reduced (LRDIMM)
- Max
- 1.5 TB (12 x 128 GB LRDIMM) with Xeon Platinum 8280M/8280L or Gold 6240L; 768 GB with 6 x 128 GB or 12 x 64 GB LRDIMM; 384 GB with 12 x 32 GB RDIMM on other supported CPUs
- Mixing
- RDIMM and LRDIMM cannot be mixed in the same blade; different LRDIMM capacity kits (e.g. 64 GB and 128 GB) cannot be mixed
Storage
- On-board M.2
- 2 x PCIe 3.0 NVMe M.2 2280/22110 slots on the system board (960 GB, 1.92 TB or 3.84 TB SSD)
- Expansion M.2
- Optional 4-slot HPE ProLiant e910 NVMe M.2 Enablement Kit (P12386-B21) on the right riser adds 4 more M.2 22110 NVMe slots
- Max internal
- 15.2 TB (4 x 3.84 TB M.2 22110 NVMe)
Graphics
- Integrated
- Up to 1920x1200 @ 60 Hz (32bpp), 16 MB video memory (via iLO 5)
- Accelerator options
- NVIDIA Tesla T4 16GB computational accelerator; Pensando DSC-25 10/25Gb 2-port SFP28 DPU (requires an accompanying RTU license)
Expansion
- Left riser (required, choose one)
- P22496-B21: 1 x PCIe Gen3 FHFL x16 slot plus 1 x PCIe Gen3 HHHL x8 slot; or P27066-B21: 2 x PCIe Gen3 FHFL x8 slots plus 1 x PCIe Gen3 HHHL x8 slot
- Right riser (optional)
- HPE ProLiant e910 4-slot NVMe M.2 Enablement Kit (P12386-B21); no PCIe I/O slots on this riser
Networking
- Embedded
- Intel X722 quad-port 10GbE (in chipset), exposed through a required network riser: 2-port 1GbE RJ45 (P17295-B21), 2-port 10GbE SFP+ (P17296-B21, 2 ports used), or 4-port 10GbE QSFP+ (P12392-B21, all 4 ports used)
- Management NIC
- Intel I210 1GbE, via the EL8000t chassis controller module
- Optional add-in
- HPE Ethernet 1Gb 4-port BASE-T I350-T4V2 Adapter
Power
- Typical
- 300 W per U
- Max
- 400 W per U
- Supply
- Shared HPE Edgeline EL8000t chassis power supplies; at least 1 PSU required, 2 recommended for redundancy
Ports
- Blade faceplate
- 2 x USB 3.0, 1 x DisplayPort, 4-port QSFP+ network connector
Physical
- Dimensions
- 3.2 x 8.4 x 14.4 in (8.13 x 21.34 x 36.58 cm), H x W x D
- Operating temperature
- Standard 10-35 C (50-95 F) with altitude derating; extended up to 55 C (ASHRAE A3/A4) depending on hardware configuration
- Chassis
- Installs into the HPE Edgeline EL8000t 2U Converged Edge System; 2 independent 2U blade bays
Management
- Embedded
- HPE iLO 5 ASIC; 3 years of iLO Advanced included per blade; Redfish 1.0 conformant RESTful API (full REST API requires installation in an Edgeline chassis)
- Security
- TPM 2.0, UEFI (Secure Boot, no legacy BIOS mode), Silicon Root of Trust, serial interface control, administrator/power-on passwords, 12 customizable iLO user accounts with SSL encryption, directory services integration
- Firmware
- HPE Edgeline Component Pack delivers firmware updates (only when installed in an Edgeline System)
Operating systems
- Supported
- Red Hat Enterprise Linux (RHEL), Windows Server - 64-bit versions only
Processors
- Intel Xeon Platinum 8280M
- Intel Xeon Platinum 8280L
- Intel Xeon Platinum 8276
- Intel Xeon Gold 6258R
- Intel Xeon Gold 6254
- Intel Xeon Gold 6252
- Intel Xeon Gold 6244
- Intel Xeon Gold 6240L
- Intel Xeon Gold 6238R
- Intel Xeon Gold 6230N
- Intel Xeon Gold 6230R
- Intel Xeon Gold 6212U
- Intel Xeon Gold 6208U
- Intel Xeon Gold 5220R
- Intel Xeon Gold 5218R
- Intel Xeon Gold 5217
- Intel Xeon Silver 4214
- Intel Xeon Silver 4210
- Intel Xeon Silver 4210R