HP ProLiant DX910 Server Blade
A single-socket, 2nd Gen Intel Xeon Scalable compute blade that plugs into the HPE ProLiant DX8000 5U converged edge chassis and ships pre-loaded with Nutanix AOS/AHV. Built for edge sites, it pairs a rugged design (extended operation up to 55 degC) with front-accessible I/O, M.2 NVMe storage and optional HPE iLO 5 remote management.
Memory
- Slots
- 12 DIMM (6 channels, 2 DIMMs per channel; single processor)
- Type
- HPE DDR4-2933 Registered (RDIMM) / Load Reduced (LRDIMM)
- Max
- 1.5 TB: 12 x 128 GB LRDIMM. Also buildable as 768 GB (6 x 128 GB LRDIMM, or 12 x 64 GB LRDIMM) or, with RDIMM only, 384 GB max (12 x 32 GB). Standard 2nd Gen Xeon SP processors support up to 1 TB/socket; the 'M'-series Xeon Gold 8280M supports up to 2 TB/socket.
- Notes
- Mixing RDIMMs and LRDIMMs is not allowed; mixing different LRDIMM capacities (e.g. 64 GB and 128 GB) is not allowed.
Storage
- Onboard M.2
- 2 x M.2 2242/2280 slots on the system board, SATA-3 or PCIe-3 (x1/x2), up to 2.048 TB each
- Expansion M.2
- Up to 4 additional M.2 2280/22110 PCIe 3.0 x4 NVMe slots via the optional HPE ProLiant e910 4-slot NVMe M.2 Enablement Kit (P12386-B21), up to 3.84 TB each; 2280 and 22110 form factors can be mixed
- Max capacity
- M.2 2242 SATA: 480 GB (2 x 240 GB); M.2 2280 NVMe: 16.4 TB (8 x 2 TB); M.2 22110 NVMe: 23.0 TB (6 x 3.8 TB), per HPE's published maximums (the 2280/22110 figures include 2 rear slots documented for a 2U blade variant sharing this table - see gotchas)
Graphics
- Integrated
- Standard integrated video, 16 MB video memory, up to 1920 x 1200 @ 60 Hz (32 bpp)
Expansion
- Slot 1 (standard, Left Riser)
- PCIe 3.0 x16 (x16 connector), half-height/half-length, front-accessible, via the optional HPE ProLiant DX910 1U x16 HHHL Left FIO Riser Kit (P27122-B21)
Networking
- Onboard
- Intel X722 quad-port 10GbE; Intel I210 1GbE
- Front network module (Flex-LOM)
- Factory choice of HPE ProLiant DX910 4-port 10GbE QSFP+ FIO Module (P27126-B21) or 2-port 10GbE SFP+ FIO Module (P27128-B21)
- Additional adapters
- HPE DX Ethernet 10Gb 2-port 562SFP+ FIO Adapter (P18455-B21); HPE DX Ethernet 1Gb 4-port 366T FIO Adapter (P18460-B21); HPE DX Ethernet 10/25Gb 2-port 640SFP28 FIO Adapter (P18462-B21)
- Transceivers
- HPE DX 25Gb SFP28 SR 100m FIO Transceiver (P18413-B21)
Power
- Per blade
- Typical 300 W per U; maximum 400 W per U
- Chassis supply
- Shared HPE ProLiant DX8000 5U chassis power supplies: 1 or 2 (for redundancy) x 1500 W, 264 VAC or -48VDC, front-cabling hot-plug
Ports
- Front
- 1 x DisplayPort; 2 x USB 3.0; 1 x network connection port; optional front-accessible PCIe 3.0 x16 HHHL slot
- Indicators/controls
- UID LED/button; Health LED; Power LED; blade release latch
Physical
- Dimensions, server cartridge (H x W x D)
- 16.71 x 18.37 x 1.98 cm (6.57 x 7.23 x 0.78 in) - the removable blade cartridge only; full node depth inside the DX8000 chassis is not published in this QuickSpecs
- Operating temperature, standard
- 10 to 35 degC (50 to 95 degF), with altitude derating
- Operating temperature, extended
- Up to 55 degC on approved hardware configurations, compliant with ASHRAE A3/A4
- Emissions
- FCC Class A; CISPR 22, EN55022, EN55024, ICES-003, CNS13438, KC (K22/K24), EN 61000-3-2, EN 61000-3-3, EN 60950-1, IEC 60950-1
Management
- Remote management
- Optional HPE iLO 5 (BD505A SKU, selected at initial configuration time, not a field add-on) with iLO Advanced standard when enabled: full remote console/KVM, RESTful API (Redfish 1.0 conformant - full REST API only when installed in an HPE Edgeline System), Intelligent Provisioning
- iLO memory
- 32 MB Flash, 4 Gbit DDR3 with ECC protection, on an iLO 5 ASIC
- Security
- Embedded TPM 2.0 (enable/disable via BIOS); UEFI Secure Boot (UEFI-only, no legacy BIOS boot); administrator and power-on passwords; serial interface control; iLO 5 supports 12 customizable user accounts with SSL encryption and directory services integration
Operating systems
- Supported
- Nutanix Acropolis OS (AOS) 5.10.5 and higher; Nutanix Acropolis Hypervisor (AHV) 2017030.279 and higher (both pre-installed at the factory); VMware vSphere 6.5 U2, 6.5 U3 or 6.7 U3 (installed separately)
Processors
- Intel Xeon Gold 6212U
- Intel Xeon Gold 6244
- Intel Xeon Gold 6230N
- Intel Xeon Gold 6254
- Intel Xeon Gold 8280M
- Intel Xeon Silver 4210