HP ProLiant DX385 Gen11
HPE's 2U, dual-processor, accelerator-optimized Nutanix hyperconverged appliance node for 4th Generation AMD EPYC 9004 Series processors (up to 96 cores), factory pre-installed with Nutanix AHV and AOS, with an All-NVMe configuration and a GPU chassis option for up to 4 double-wide or 8 single-wide accelerators.
Memory
- Slots
- 24 DIMM (12 per processor, 12 channels per processor, 1 DIMM per channel)
- Type
- HPE DDR5 Smart Memory, Registered (RDIMM)
- Max
- 6.0 TB: 24 x 256 GB RDIMM @ 4800 MT/s, 1 DPC
- Protection
- Advanced ECC (single-bit correction, all multi-bit detection within one DRAM chip)
- Notes
- LRDIMM and Persistent Memory are not supported; mixing x4 and x8 memory is not allowed
Storage
- Chassis types
- 12 LFF; 8 SFF NVMe GPU chassis; All-NVMe (up to 20 SFF NVMe, direct-attached)
- Max capacity
- Hot Plug LFF SAS HDD 240 TB (12 x 20 TB); Hot Plug SFF All NVMe SSD 307 TB (20 x 15.36 TB); Hot Plug LFF SAS SSD 92.16 TB (12 x 7.68 TB); Hot Plug SFF NVMe SSD 122.88 TB (8 x 15.36 TB)
- Boot
- HPE DX NS204i-u Gen11 NVMe Hot-Plug Boot Optimized Storage Device, standard (2 x 480 GB M.2 NVMe, does not occupy a PCIe slot)
- Smart Array controller
- HPE MR216i-o Gen11 x16 Lanes without Cache OCP SPDM Storage Controller (OROC, occupies an OCP slot)
- Software RAID
- Not supported on this AMD Gen11 server
Graphics
- Integrated
- Standard integrated video, 16 MB video memory, up to 1920 x 1200 @ 60 Hz (32 bpp)
- GPU options
- NVIDIA A16 64GB PCIe (double-wide); NVIDIA L40 48GB PCIe (double-wide); NVIDIA L40S 48GB PCIe (double-wide); DX NVIDIA L4 SW PCIe (single-wide, up to 8 with the 8SW GPU FIO kit or up to 4 with the 4DW GPU FIO kit)
- Limits
- Double-wide GPUs require the GPU CTO chassis and 4DW GPU FIO enablement kit; mixing different GPU types is not supported; several GPUs require a Power Distribution Board (PDB) kit and matching GPU power cable kit
Expansion
- Primary riser (default)
- Slot 3 only, PCIe 5.0 x16, Proc 1
- Primary riser (2x16 upgrade, P60293-B21)
- Slots 1 and 2 added, PCIe 5.0 x16 each, Proc 1; cannot be used with the 4LFF rear cage or NVMe CTO server
- Secondary riser (x16 Slot1, P60294-B21)
- Slot 6, PCIe 5.0 x16, Proc 2; requires the 2nd processor
- Secondary riser (2x16 upgrade, P60295-B21)
- Slots 4 and 5 added, PCIe 5.0 x16 each, Proc 2; requires the 1x16 secondary riser first
- OCP
- OCP 3.0 slot 1 combined with Primary Slot 1, and Secondary Slot 6 combined with Tertiary Slot 7 (on other DX3xx risers), are each limited to 112 GB/s by the processor
Networking
- Embedded
- None: choice of OCP 3.0 or PCIe standup card
- 10 GbE
- Broadcom BCM57416 Ethernet 10Gb 2-port BASE-T
- 10/25 GbE
- Broadcom BCM57414 Ethernet 10/25Gb 2-port SFP28; Mellanox MCX631102AS-ADAT 10/25Gb 2-port SFP28; Intel E810-XXVDA4 10/25Gb 4-port SFP28
- 100 GbE
- Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56
- OCP 3.0
- Broadcom BCM57416 10Gb 2-port BASE-T; Broadcom BCM57414 10/25Gb 2-port SFP28; Mellanox MCX631432AS-ADAI 10/25Gb 2-port SFP28
- Management
- 1 GbE dedicated iLO port
Power
- Bays
- Up to 2 HPE Flex Slot hot-plug power supplies (redundant)
- Options
- 800 W Platinum (94%); 1600 W Platinum (94%, 200-240 VAC only); 1600 W -48VDC (94%, 200-240 VAC only)
- Input
- 100-120 VAC or 200-240 VAC depending on supply
Ports
- Front
- 1 x USB 3.2 Gen1, iLO service port
- Rear
- 1 x VGA, 2 x USB 3.2 Gen1, 1 x dedicated iLO 1 GbE, optional serial port
- Internal
- 2 x USB 3.2 Gen1
- USB total
- 5 standard (1 front, 2 rear, 2 internal)
Physical
- Form factor
- 2U rack
- Dimensions (LFF)
- 8.75 x 43.47 x 66.3 cm (3.44 x 17.11 x 26.1 in)
- Weight (LFF)
- Minimum 18.24 kg (40.13 lb) with 1 LFF drive; Maximum 36.72 kg (80.78 lb) with 12 LFF drives, 2 processors, 2 power supplies, 1 Smart Array, 2 risers
Management
- BMC
- HPE iLO 6 ASIC, 64 MB flash, 8 Gbit DDR4 with ECC
- Tools
- UEFI, Intelligent Provisioning, iLO RESTful API (Redfish), Smart Update Manager, HPE OneView, HPE GreenLake
- Security
- UEFI Secure Boot/Secure Start, Immutable Silicon Root of Trust, FIPS 140-3 validation (iLO 6 certification in progress at launch), Common Criteria certification (in progress), TPM 2.0, chassis intrusion detection option, bezel locking kit
Operating systems
- Listed
- Nutanix Acropolis Hypervisor (AHV); factory pre-installed with Nutanix AOS and AHV
Processors
- AMD EPYC 9124
- AMD EPYC 9174F
- AMD EPYC 9224
- AMD EPYC 9254
- AMD EPYC 9274F
- AMD EPYC 9334
- AMD EPYC 9354
- AMD EPYC 9374F
- AMD EPYC 9454
- AMD EPYC 9474F
- AMD EPYC 9534
- AMD EPYC 9554
- AMD EPYC 9634
- AMD EPYC 9654
- AMD EPYC 9734
- AMD EPYC 9754
- AMD EPYC 9184X
- AMD EPYC 9384X
- AMD EPYC 9684X