HP ProLiant DL20 Gen10 Plus
HPE's short-depth 1U single-socket entry rack server for Intel Xeon E-2300 and Pentium G6405 processors, with four DDR4-3200 ECC UDIMM slots (128 GB max), 2 LFF or 4 (+2) SFF drive bays and two PCIe 4.0 slots. HPE has retired it, so it is now bought used or refurbished.
Memory
- Slots
- 4 DIMM (2 channels, 2 DIMMs per channel)
- Type
- HPE DDR4 Standard Memory ECC UDIMM, up to 3200 MT/s; no RDIMM, LRDIMM or non-ECC UDIMM
- Max
- 128 GB: 4 x 32 GB UDIMM
- Kits
- HPE 8 GB 1Rx8 (P43016-B21), 16 GB 1Rx8 (P43019-B21), 32 GB 2Rx8 (P43022-B21), all DDR4-3200 CAS 22 ECC UDIMM
- Speed
- Xeon E: 3200 MT/s at 1 or 2 DIMMs per channel, except 32 GB dual-rank at 2 DIMMs per channel = 2933 MT/s; Pentium G6405: 2666 MT/s
- Population
- Slots 3-A, 1-B, 4-C, 2-D; 1, 2 or 4 DIMMs recommended; do not mix capacities in a channel that holds a 32 GB DIMM
- Protection
- ECC
Storage
- Chassis options
- 2 LFF non-hot-plug (SATA), 2 LFF hot-plug (SAS/SATA) or 4 SFF hot-plug (SAS/SATA)
- SFF expansion
- HPE DL20 Gen10 Plus 2SFF HDD Enablement Kit (P45450-B21) adds 2 SFF bays in the media bay of the 4 SFF chassis; needs a 500 W power supply
- NVMe
- U.3 NVMe SSDs listed as options; the user guide lists U.3 NVMe support in the SFF drive boxes, with a tri-mode controller
- Optical
- Optional 9.5 mm SATA DVD-ROM (726536-B21) or DVD-RW (726537-B21); SFF chassis needs the ODD Enablement Kit (P06677-B21), LFF chassis the ODD Cable Kit (P06681-B21); the SFF media bay takes either the optical drive or the 2 SFF cage
- M.2
- HPE ProLiant DL20 Gen10 Plus M.2 LP Enablement Kit (P45458-B21, does not use a PCIe slot); the M.2 SSD pass-through card has 2 M.2 slots (2280/22110); M.2 NVMe runs at PCIe 3.0 x2 and is not supported by Smart Array controllers
- M.2 (PCIe card)
- HPE Universal SATA 6G AIC HHHL M.2 SSD Enablement Kit (878783-B21): 2 M.2 SATA SSDs, uses a PCIe slot, needs the SATA M.2 Cable Kit (P45468-B21)
- Boot device
- HPE NS204i-p x2 Lanes NVMe PCIe3 x8 OS Boot Device (P12965-B21): 2 x 480 GB M.2 NVMe in RAID 1, uses a PCIe slot, UEFI only, not with the Pentium G6405
- Embedded RAID
- Intel VROC SATA software RAID 0/1/5/10; disabled by default (SATA AHCI), enable in RBSU; UEFI only; Windows Server and Linux, not VMware
- Smart Array
- E208i-a or P408i-a SR Gen10 modular (AROC) controller; E208e-p or P408e-p external; P408 needs the HPE 12W Smart Storage Battery (782961-B21)
- Tri-mode
- HPE MR216i-a / MR216i-p / MR416i-a / MR416i-p Gen10 Plus, Microchip SmartRAID SR416i-a (NVMe/SAS); needs the 4SFF Chassis Cable Kit (P45471-B21)
- Max internal
- 92.16 TB: 6 x 15.36 TB SAS SSD (4+2 SFF); 36 TB: 2 x 18 TB LFF HDD
- SAS speed
- Up to SAS 12G; 24G SAS drives run at 12G
Graphics
- Integrated
- Integrated Matrox G200, 16 MB video memory, up to 1920 x 1200 at 60 Hz (32 bpp)
- Options
- No graphics cards listed in the QuickSpecs
Expansion
- Slots
- 2 on the primary riser (both from CPU 1)
- Riser (QuickSpecs)
- HPE DL20 Gen10 Plus 2x8 LP FIO Riser Kit (P46114-B21); at least one riser is mandatory
- Slot 1
- PCIe 4.0 x8, low profile (half height, half length), 25 W
- Slot 2
- PCIe 4.0 x8 electrical in an x16 connector, full height, half length, 75 W
- Alternative riser (user guide)
- Two-slot PCIe4 x16/x4 riser: slot 1 PCIe4 x4 electrical (x8 connector) low profile, slot 2 PCIe4 x16 full height, half length
- Restrictions
- Type-a tri-mode controllers (SR416i-a, MR416i-a, MR216i-a) make slot 2 unusable (max 1 PCIe card); 4-port RJ45 NICs fit slot 2 only
Networking
- Embedded
- Broadcom BCM5720 2-port 1GbE BASE-T (NIC 1 doubles as the shared iLO port)
- SR-IOV
- Not supported
- 25GbE options
- Broadcom BCM57414 2p SFP28, Intel E810-XXVDA2 2p SFP28, Intel E810-XXVDA4 4p SFP28, Mellanox MCX512F-ACHT 2p SFP28
- 10GbE options
- Broadcom BCM57416 2p BASE-T, Broadcom BCM57412 2p SFP+, Intel X710-DA2 2p SFP+
- 1GbE options
- Intel I350-T4 4p, Broadcom BCM5719 4p BASE-T
- Fibre Channel
- HPE SN1200E and SN1100Q 16Gb, SN1610E and SN1610Q 32Gb, single or dual port
Power
- Standard
- HPE DL20 Gen10 290W Platinum non-hot-plug power supply (P21649-B21, 92%); P45476-B21 290 W (94%, factory-installed only, EMEA only)
- Redundant
- Up to 2 Flex Slot hot-plug: 500 W Platinum (865408-B21), 800 W Titanium (865438-B21, 200-240 VAC only), 800 W -48 VDC (865434-B21)
- Redundancy kit
- HPE DL20 Gen10 Plus RPS FIO Enablement Kit (P45948-B21) is mandatory for Flex Slot supplies and is factory-installed only
- Rules
- Do not mix two different power supplies; the 2 SFF drive kit needs a 500 W supply
- 290 W input
- 100-120 / 200-240 VAC, 5.5 A max at 100 VAC, 550 W input at 100 VAC; 290 W steady state, 366 W peak for 10 s
- Fans
- 3 non-hot-plug, non-redundant fans (2 in the front fan cage, 1 central)
Ports
- Front
- 1 x USB 3.2 Gen1, 1 x iLO service port (USB)
- Rear
- 2 x USB 3.2 Gen1, 1 x VGA, 2 x 1GbE RJ45, 1 x dedicated iLO 1GbE RJ45, 1 x serial (optional, HPE ProLiant DL20 Gen10 Plus Serial Port Cable Kit P45469-B21)
- Internal
- 1 x USB 3.2 Gen1
- microSD
- Optional HPE 32GB microSD RAID 1 USB Boot Drive (P21868-B21)
Physical
- Form factor
- 1U rack
- Dimensions (H x W x D)
- 4.32 x 43.46 x 38.22 cm (1.70 x 17.11 x 15.05 in)
- Weight
- 6.00 kg (2 LFF non-hot-plug) to 10.0 kg (hot-plug LFF/SFF, fully loaded)
- Rails
- HPE 1U Short Friction Rail Kit (775612-B21)
- Bezel
- HPE 1U Gen10 Bezel Kit (867998-B21) and Bezel Lock Kit (875519-B21) need the factory-installed DL20 Latch Ear FIO Kit (P06716-B21)
- Operating temperature
- 10-35 C standard; 5-45 C extended for approved configurations
- Acoustics
- LpAm 26-30 dBA (pre-configured models, 23 C)
Management
- BMC
- HPE iLO 5 (standard) with Intelligent Provisioning; iLO Advanced and iLO Advanced Premium Security Edition licences optional
- iLO ports
- Dedicated 1GbE iLO port (default) or shared on NIC 1 (set in RBSU); front iLO service port
- Software
- HPE OneView Standard/Advanced, HPE GreenLake for Compute Ops Management, InfoSight, Smart Update Manager, iLO RESTful API (Redfish), IPMI 2.0
- Security
- Silicon Root of Trust, UEFI Secure Boot, embedded TPM 2.0 (disabled on China shipments), Intel SGX, chassis intrusion kit (866473-B21)
- Firmware
- UEFI Class 2, UEFI mode by default; legacy mode via factory setting 758959-B22
- Warranty
- 3 years parts, 3 years labor, 3 years onsite next business day
Operating systems
- Support
- Certified OS and hypervisors are listed in HPE's Servers Support & Certification Matrices
- Intel VROC SATA
- Windows Server and Linux; not VMware
- VMware boot
- ESXi after 7.x will not support SD card / USB as the only boot device; use M.2 or another persistent device
Processors
- Intel Xeon E-2388G
- Intel Xeon E-2386G
- Intel Xeon E-2378G
- Intel Xeon E-2378
- Intel Xeon E-2374G
- Intel Xeon E-2356G
- Intel Xeon E-2336
- Intel Xeon E-2334
- Intel Xeon E-2324G
- Intel Xeon E-2314
- Intel Pentium G6405