HP ProLiant Compute DL110 Gen12
A compact, short-depth 1U single-socket HPE ProLiant server built for telco/5G edge deployments (vRAN, Open RAN), NEBS Level 3 ruggedized, powered by a single Intel Xeon 6 SoC processor with 8x25GbE onboard networking.
Memory
- Slots
- 4 DIMM slots, 4 channels, 1 DIMM per channel
- Max
- 512 GB (4 x 128 GB RDIMM @ 6400 MT/s)
- Type
- HPE DDR5 Smart Memory, Registered (RDIMM)
Storage
- Boot storage
- Up to 2 x M.2 NVMe SSD (2280 or 22110 form factor), on the motherboard; max 3.84 TB (2 x 1.92 TB)
- Software RAID
- Intel Virtual RAID on CPU (VROC), RAID 0/1 depending on licensing; disabled by default
Expansion
- Slot 1
- PCIe 5.0 x16, full-height half-length (optional 2x16 FHHL riser P86620-B21)
- Slot 2
- PCIe 5.0 x16, full-height half-length (optional 2x16 FHHL riser P86620-B21)
- OCP Slot A
- PCIe 5.0 x16, OCP NIC 3.0 Dual Small Form Factor (DSFF), rear (optional)
- OCP Slot B
- PCIe 5.0 x16, OCP NIC 3.0 Small Form Factor (SFF), rear (optional)
Networking
- Onboard
- 8 x 10/25GbE integrated on the base CTO configuration (P86628-B21)
- Adapters
- 1/10/25/100 GbE PCIe and OCP 3.0 adapters; HPE Data Processing Unit InfiniBand NDR/NDR200 adapters (NVIDIA BF3)
Power
- Supplies
- Up to 2 x HPE M-CRPS Hot Plug Reverse Air Flow: 1300 W Titanium AC or 1000 W -48VDC (mixing not supported)
- Input
- 1300 W PSU: 100-120 VAC low-line / 200-240 VAC high-line / 240 VDC; 1000 W PSU: -40 Vdc to -72 Vdc
- BTU (max)
- 1300 W PSU: up to 4741 BTU/hr at 240 VAC; 1000 W PSU: up to 3736 BTU/hr at -40 VDC
Ports
- Front
- 1 x iLO Service Port (USB-C), 1 x USB 3.2 Gen1
- Rear
- 1 x iLO dedicated 1 Gb RJ-45 management port
Physical
- Dimensions
- 4.29 x 43.46 x 47.28 cm (1.69 x 17.11 x 18.61 in)
- Weight
- 10.66 kg (23.5 lb) minimum – 12.13 kg (25.4 lb) maximum
Management
- Controller
- HPE iLO 7 ASIC, standard, with Intelligent Provisioning
Processors
- Intel Xeon 6 6716P-B